To perform a sysex dump from a Nova to a sequencer connect the midi output of the Nova to the midi input of the sequencer. Ensure that the sysex record filter is disabled in the sequencer (ie unchecked). Create a new track in the sequencer that is set to the global midi channel of the Nova.
From the Nova, select the sysex transmission page in the global menu.
Use the fast data controls to choose which type of data you would like
to transmit - if you want to make a complete back up of the Nova
memory, select "total data". Put the sequencer into record at 150 bpm
and press the midi button in the part edit section of the Nova to
initiate the data transfer. The midi indicator should illuminate in the
sequencer transport window.
When the data transfer is complete the midi indicator will stop and the
display on the Nova will revert to normal. The sequencer can now be
stopped and the file can be saved to a computer drive.
For total data or entire bank transfers to check that the data is
valid, change a name of a program in the Nova - eg Sintillator to
Tintillator and write this change to memory. Set the sequencer tempo to
080 bpm and ensure that the sequencer midi out is connected to the Nova
midi in. Play back the file. Watch the screen of the Nova, it should
show "receiving sysex...". Check that the display does not show "packet
When the file has played through, turn the Nova off and back on again
(this clears the program buffers) and take a look to see that the
program name has reverted back to Sintillator.
Note: Rather than using a Sequencer to record the Data, you may want to use a MIDI utility program such as Midiox (for PC) http://www.midiox.com/ or MIDI Monitor (for Mac) http://www.snoize.com/
Haben Sie Fragen? Anfrage einreichen