Folgen

How can the Supernova be completely reset?

To restore the operating system of a Supernova, hold down the part 6 button while you turn the synthesiser on. The display will show "reload O/S from ROM to flash?". Push the page up button to accept this prompt. The reload should take around 5 seconds.

Once the reload is complete you can restore the factory settings for the Supernova. To do this find the local control & memory protect page in the global menu. Ensure that local control is turned on and memory protect is turned off. Press the page up button to advance to the restore from ROM page of the global menu. Use the fast data controls to select "total data" as the option to be restored.

Push the write button twice to initiate the reload. This reload takes around 15 seconds. Once the reload has taken place, the memory (not the buffers) will have been initialised. Turn the Supernova off and back on again or advance to a new Program / Performance to clear the buffers. The items, which are restored are: Program banks A-D, Performance banks A-B, all arp patterns and the global menu data. In a Supernova fitted with a 24-voice expansion card the program banks E-H and Performance banks C-D, cannot be restored as these are not stored in ROM.


War dieser Beitrag hilfreich?
0 von 0 fanden dies hilfreich
Haben Sie Fragen? Anfrage einreichen

Kommentare

Didn't find what you were looking for?

Search again using our search tool.