Knob movements cannot be recorded into a sequencer

Most sequencers feature the ability to "Re-map" the MIDI Channel. Check that the playback channel of the track on the sequencer corresponds to the RX channel of the DrumStation / D-Station. Sequencers usually have a feature to "Filter" out Controller data, check this feature is not active on the sequencer also check that "Remap Controllers" is not active on the sequencer.
War dieser Beitrag hilfreich?
0 von 0 fanden dies hilfreich
Haben Sie Fragen? Anfrage einreichen


Didn't find what you were looking for?

Search again using our search tool.