How to force the Nocturn Keyboard to update firmware.

Applies to: Nocturn keyboard

To place the Nocturn Keyboard into receive mode please press and hold buttons 1, 2 and 3 and switch the keyboard on.

You should see button 1 flash to show it is ready to receive the firmware.

Download the attached OS.Syx file from this article.

Now open Sysex Librarian or another similar software, double click on the OS.Syx and select the Nocturn Keyboard as the Destination.

If you now press play you should now see the firmware update onto the unit.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments