Using Circuit to sequence external MIDI instruments

Applies to: Circuit


You can use Circuit to sequence external MIDI instruments. Plug one of the MIDI breakout cables (included in the box with Circuit) in to Circuit's MIDI Out. Connect a MIDI DIN cable to this and to the Midi In of a synth like Bass Station II.

This is set up as per the key below.

Synth 1 = MIDI channel 1

Synth 2 = MIDI channel 2

Drums 1 to 4 = MIDI channel 10


Adjusting the level in the mixer for Synth 1, 2 and Drums 1 to 4 will determine if the sequencer plays just the external instruments or combines them with Circuit's internal sounds.


Was this article helpful?
1 out of 1 found this helpful
Have more questions? Submit a request