Applies to: Bass Station II 

1. Hold down Save + Patch/Value Left & Patch/Value Right whilst turning the power switch on. The screen will show btl. 
2. Press the right arrow three times, so the screen shows cAL. Press Save once.
3. Move the Pitch wheel to the bottom and hold. Press Save.
4. Centre the Pitch wheel and press Save.
5. Move the Pitch wheel to the top and press Save.
6. The screen will now show cbt.
7. Move Mod wheel to the bottom and press Save.
8. Move Mod wheel to the top and press Save.
9. The screen will now show cAL again.
10. Power cycle the Bass Station II.