Applies to: Bass Station II (AFX 4.14 Update)

The 4.14 update allows you to use overlays to change the patch settings per note. If you have any other questions about this update, please see here:

Bass Station AFX 4.14 - FAQs

The main features of this update can be accessed using the following key combinations - please see the dedicated user guide at the link below for a more in-depth explanation of the settings and further tweaks that can be made:

Bass Station II 4.14 Update User Guide

Loading Overlays

By default, no overlays are selected in each patch. To select a bank of overlays:

1. Hold Function
2. Press the Arp-Swing key twice.
3. Choose from o-0 (no overlays), and o-[1-8] (overlay banks 1-8).

Saving Overlays

Each bank of overlays (1-8) must be saved individually to do this go to:

1. Overlay menu (Function + Arp Swing twice)
2. Press Save

Copying/Pasting Overlays to different keys.

1. Press and hold Function + Transpose (in that order)
2. Press and hold a key (Copy)
3. Press another key (Paste).

CPY will show on the screen when copying, PST will show when pasting.

Protecting (Read only) Overlays

1. Hold Function
2. Press the Seq-Retrig key twice
3. On the Screen, change r-0 (read-only disabled) to 1 (read-only enabled).

Fixed Duration Sustain Envelopes

1. Hold Function
2. Press the Amp-Env or Mod-Env key Four Times
3. Bank to d-1

Envelope Retriggering Count

1. Hold Function
2. Press the Amp-Env or Mod-Envkey Three Times
3. Bank to [C1-16]to set the number of loops.

When set to c-0, the loops will be indefinite when the key is held.

Glide Divergence

1. Hold Function
2. Press the Input Gain key Twice (g-0)
3. Select from g-[1-15].

When glide divergence is enabled, oscillator 2 will always glide more slowly than oscillator 1. The selected value determines how much more slowly oscillator 2 glides.

Extended Sub-Oscillator Tuning

1. Hold Function
2. Adjust the Course/Fine tune Controls