Applies to: ReMOTE

Follow these steps to set the ReMOTE up to work with Reason (version 3 or later):

1. Connect the ReMOTE to your computer, turn it on and launch Reason.
2. In Reason, go to the 'Control Surfaces & Keyboards' page of Preferences.
3. Click 'Add' to add a controller.
4. In the next window, select:
   • Manufacturer: Novation
   • Model: ReMOTE Series
   • MIDI Input: ReMOTE
   • MIDI Output: ReMOTE
   • then click 'OK'.
5. A warning will appear in Reason telling you that a template is about to be uploaded to the ReMOTE. Before clicking OK, make sure that memory protect is turned off. To do this, press the 'global' button to enter the global menu, scroll to the 'Memory Protect' page. Use the 'data/value' encoder to set this to 'Off' then press 'write' to save the setting and then use the 'play' to return to play mode.
6. Click OK in Reason and after a couple of seconds, the ReMOTE will receive the template. To save this template to the ReMOTE press the 'write' button once, then use the 'data/value' encoder to select the memory location to which you want to save it. Once selected, press 'write' 3 more times to complete the save.
7. After this, you can exit preferences and start using Reason. The Reason template MUST be selected to control Reason. The ReMOTE will then control whichever device has its keyboard (MIDI In) icon selected in the Reason sequencer.