Applies to: Impulse
Update
We recommend using the original USB cable for this update where possible.
Download and install SysEx Librarian. This is found in the link below:
Download the attached .syx file at the bottom of this article. Hold down the 'Shift', '+' and '-' buttons of the Impulse then connect the USB cable. This will access the Boot menu. 'Exit' should be displayed on the Impulse's LCD.
Open SysEx Librarian and drag the attached .syx file into the SysEx Librarian window. Click on the 'Destination' menu and select 'Impulse'. Ensure that the .sys file is highlighted in blue by clicking on it. Click on the 'Play' button.
The Impulse's LCD should display the word 'Update'. Wait for the update to complete.
Please note you will then need to clear the Impulse from the MIDI Studio found in Finder > Applications > Utilities > Audio MIDI Setup. Once in this program, disconnect the Impulse and go to the Window menu and then MIDI Studio. Once here select the Impulse and click delete:
Note that you may need to do this even if you did the firmware update on another system.
A guide on the functionality can be found here:
What does the HUI update for the Impulse do?
If you wish to use it with Logic after the update please see our guide here:
How to set up Logic with the Impulse HUI firmware update
Other DAW setup guides can be found in our user guide, page 31 onwards: